Building an outdoor plant box with a uranium sensor is a unique project that combines gardening with environmental safety. This DIY guide will walk you through the process step by step, ensuring your plants thrive while monitoring radiation levels.

Materials Needed:

- Wooden planks or recycled materials for the plant box

- Soil and plants of your choice

- Uranium sensor or Geiger counter

- Waterproof casing for the sensor

- Basic tools (saw, drill, screws)

Step 1: Construct the Plant Box

Start by building a sturdy plant box using wooden planks. Ensure it’s large enough to accommodate your plants and the sensor. Drill drainage holes at the bottom to prevent waterlogging.

Step 2: Install the Uranium Sensor

Place the uranium sensor inside a waterproof casing to protect it from moisture. Position it near the soil surface for accurate radiation detection. Secure it firmly to avoid displacement.

Step 3: Add Soil and Plants

Fill the box with nutrient-rich soil and plant your chosen greenery. Water them thoroughly and ensure the sensor remains accessible for readings.

Step 4: Monitor Radiation Levels

Regularly check the sensor’s readings to ensure the environment is safe for your plants. If radiation levels spike, consider relocating the box or investigating the source.

This project not only enhances your garden but also promotes awareness of environmental safety. Happy building!