Fiberglass resin can be a stubborn substance to remove from outdoor cushions, but with the right approach, you can restore them to their original condition. Here’s a step-by-step guide to help you tackle this challenge safely and effectively.

1. Scrape Off Excess Resin: Use a plastic scraper or a dull knife to gently remove as much dried resin as possible without damaging the fabric. Avoid metal tools to prevent tears.

2. Apply Acetone or Rubbing Alcohol: Dampen a clean cloth with acetone or rubbing alcohol and blot the stained area. Test a small, inconspicuous spot first to ensure the solvent doesn’t discolor the fabric.

3. Gently Scrub the Stain: Use a soft-bristle brush or sponge to work the solvent into the resin. Repeat the process until the resin dissolves and lifts from the fabric.

4. Rinse with Soapy Water: Mix mild dish soap with warm water and gently clean the area to remove any remaining residue. Rinse thoroughly with clean water.

5. Air Dry Completely: Allow the cushion to dry fully in a well-ventilated area before using it again.

For stubborn stains, consider using a commercial adhesive remover designed for fabrics. Always wear gloves and work in a ventilated space when handling chemicals. With patience and care, your outdoor cushions can look as good as new!