When you ask, “Do you provide mounting hardware for a bench that can be bolted down to concrete?” the answer from our outdoor bench factory is a clear, practical yes. We understand that for public spaces, parks, campuses, or commercial patios, a bench that stays permanently in place is not a luxury—it is a safety and security requirement.

Our standard outdoor bench models are engineered with pre-drilled steel mounting plates at each leg. These plates accept 3/8-inch or 1/2-inch stainless steel expansion anchors, and we include these anchors with every bench order intended for concrete installation. The hardware kit typically contains four wedge-type expansion bolts (sized to match the bench’s mounting base), heavy-duty washers, and hex nuts. The bolts are made of stainless steel to resist corrosion, which is critical when the bench is exposed to weather or frequent cleaning.

Here is what you can expect from our factory hardware package:

- Each bench arrives with four stainless steel wedge anchors designed for use in solid concrete or concrete block.

- The anchors are pre-assembled with a nut and washer to simplify your installation.

- The bolt dimensions are calibrated to the bench’s leg base: for an 8-foot commercial bench, we typically supply 3/8 x 3-inch anchors, but we also customize for heavier or lighter models.

- In addition to the bolts, we provide clear step-by-step drilling and torque instructions to ensure a secure hold and to prevent concrete cracking.

If you require specialized hardware—such as tamper-resistant bolts, flush-mount covers, or corrosion coatings for coastal environments—our factory can adapt the kit to your project specs. We also offer optional grade-304 stainless steel for high-moisture zones.

Important installation advice from our engineers:

1. Drill holes at least 2.5 inches deep into sound concrete (minimum 4-inch thickness).

2. Use a hammer drill with a carbide-tipped bit matched to the anchor diameter.

3. Clean the hole of dust completely before inserting the anchor.

4. Tighten the nut gradually with a torque wrench (typically 40–55 ft-lbs, depending on anchor size).

Therefore, the short answer to your question is: Yes, our outdoor bench factory includes mounting hardware for bolting to concrete, and we ensure it is strong, rust-resistant, and easy to use. If your project demands extra strength or vandal resistance, just tell us the specifications, and we will modify the hardware accordingly. Your bench will not move until you want it to—and that is the peace of mind we design for.