Yes. Impact resistance is a required part of our testing program for heavy-duty stadium trash cans, because stadium waste bins face collisions from carts, cleaning equipment, crowd traffic, and accidental drops. We do not rely on a single lab check; we combine repeatable impact tests with real-world abuse simulation.
Our factory tests the can body, rim, base, lid, and hinges separately. For the body and base, we perform weighted drop tests from specified heights and repeated pendulum or striker impacts at seams and high-stress corners. Rim and lid tests use repeated strikes and loaded closure cycles to check for cracking, warping, and latch failure. For cold-climate stadiums, low-temperature impact testing helps confirm the material does not become brittle. We also run loaded rolling and cart-impact simulations and inspect for cracks, permanent deformation, loose hardware, and hinge separation.
Acceptance criteria are agreed before production: no dangerous sharp edges, no structural cracks, no lid release under normal impact, and stable dimensions and function after the test cycle. If a design fails, we adjust wall thickness, ribbing, material compound, or hardware, then retest. For stadium projects, we can provide test documentation, recommend impact-rated models, and produce samples for your own drop and abuse testing. Tell us your expected load, cleaning method, and impact risks, and our trash can factory will match a heavy-duty solution to your stadium.
