Yes. For a beachside boardwalk, salt spray is too aggressive for a standard paint finish, so our outdoor bench factory treats metal as a corrosion-control system rather than a single coating. The right specification depends on the substrate, design, budget, and expected maintenance, but we routinely build coastal benches with hot-dip galvanizing, zinc-rich primers, epoxy intermediate coats, marine-grade aluminum, and UV-stable powder topcoats.
For carbon steel frames, we can specify hot-dip galvanizing to a recognized standard, then add a compatible primer and powder topcoat where color and appearance matter. For aluminum, we use a conversion coating and marine-grade powder coating to improve adhesion and reduce pitting. Stainless steel 316 hardware, isolation washers between dissimilar metals, sealed welds, and properly treated cut edges are also important because salt spray attacks weak points first.
A coating alone is not enough. We design drainage holes, sloped surfaces, and standoffs so water cannot collect around legs and fasteners. We can also run salt-spray testing, adhesion checks, and accelerated weathering tests to validate the coating system before production. For beachside boardwalk benches, the goal is a multi-layer defense: galvanic protection where needed, a barrier coating, corrosion-resistant hardware, and drainage-friendly detailing.
Maintenance remains part of the solution. Periodic freshwater rinsing, inspection of scratches and fastener areas, and prompt touch-up of damaged coatings will extend service life. So the direct answer is yes: our outdoor bench factory can treat metal with special salt-resistant coating systems engineered for brutal salt spray, and we recommend matching the treatment to the boardwalk’s exposure level rather than relying on a generic outdoor finish.
