The short answer is that our outdoor bench factory uses both stainless steel and zinc-coated hardware—but not interchangeably, and not as a vague default. The specification depends on the bench’s exposure, expected service life, budget, and the exact component. For visible, load-bearing, or weather-exposed fasteners—bolts, screws, washers, brackets, hinges, and threaded inserts—we normally specify stainless steel. Grade 304 is our standard for general outdoor benches, while grade 316 is reserved for coastal, marine, poolside, and high-chlorine environments. These grades resist rust and staining far better than ordinary zinc plating and keep their appearance and strength through repeated wet-dry cycles.
Zinc-coated hardware still has a legitimate place in the factory, but it must be specified precisely. We use hot-dip galvanized hardware for heavy-duty structural connections and sheltered or powder-coated assemblies where a thicker zinc layer provides good sacrificial protection. Electro-zinc plating is acceptable only for interior, covered, or low-exposure applications; it is not our choice for exposed outdoor bench joints that will see rain, salt, or constant humidity. A customer who simply asks for “zinc-coated” hardware may receive a thin coating that looks fine at delivery but fails early in the field. That is why we ask for coating thickness, salt-spray expectations, and installation environment before quoting.
In practice, a typical outdoor bench may combine materials. The frame and exposed fasteners might be stainless steel, while hidden internal brackets are hot-dip galvanized and then protected by powder coating. The goal is not to use stainless everywhere for marketing, nor to cut costs with basic zinc plating. The goal is to match each hardware item to its real exposure and load. We also check compatibility between stainless fasteners and aluminum or galvanized steel components to avoid galvanic corrosion, and we use isolating washers or barriers where different metals meet.
For buyers, the practical answer is to ask the factory three questions: What grade of stainless steel is used for exposed fasteners—304 or 316? Is the zinc coating electro-plated or hot-dip galvanized, and what thickness is specified? Which components are stainless, which are zinc-coated, and which are hidden or protected? A factory that answers these clearly is using hardware intentionally. A factory that says only “zinc-coated” without grade or coating details is giving an incomplete answer. Our outdoor bench factory uses stainless steel as the primary choice for exposed outdoor hardware and zinc-coated or galvanized hardware as a controlled, application-specific option. That is the difference between hardware that survives seasons and hardware that only survives the showroom.
