Spray sealant can protect your outdoor table from weather damage, but removing it when it wears off or becomes uneven can be tricky. Here’s a step-by-step guide to safely remove spray sealant without harming your table’s surface.

1. Gather Supplies: You’ll need a mild detergent, warm water, a soft scrub brush or sponge, white vinegar or rubbing alcohol, and a plastic scraper (for stubborn spots). Avoid harsh chemicals that could damage the table’s finish.

2. Test a Small Area: Before applying any solution, test it on an inconspicuous spot to ensure it doesn’t discolor or damage the material.

3. Clean with Soapy Water: Mix warm water with a few drops of dish soap. Scrub the sealed area gently to loosen the sealant. Rinse with clean water and let it dry.

4. Use Vinegar or Rubbing Alcohol: For tougher residue, dampen a cloth with white vinegar or rubbing alcohol and rub the affected area. These solvents break down sealant without harming most surfaces.

5. Scrape Carefully: If sealant remains, use a plastic scraper at a shallow angle to avoid scratching the table. Reapply solvent if needed.

6. Rinse and Dry: Once the sealant is gone, rinse the table thoroughly and dry it with a clean cloth.

For future protection, reapply a fresh coat of sealant evenly, following the manufacturer’s instructions. Regular maintenance will keep your outdoor table looking great for years!

By following these steps, you can effectively remove old spray sealant and prepare your table for a new finish or natural use. Always prioritize gentle methods to preserve the table’s integrity.