Removing gutter sealant from an outdoor table can be tricky, but with the right approach, you can restore your furniture to its original condition. Here’s a step-by-step guide to help you tackle this task effectively.

1. Scrape Off Excess Sealant: Use a plastic scraper or putty knife to gently remove as much sealant as possible. Avoid metal tools to prevent scratching the table surface.

2. Apply a Solvent: Choose a solvent like rubbing alcohol, acetone, or a commercial sealant remover. Apply it to the remaining sealant and let it sit for a few minutes to soften the material.

3. Scrub the Area: Use a stiff-bristled brush or an old toothbrush to scrub the softened sealant. Work in small sections for better control.

4. Wipe Clean: Dampen a cloth with the solvent and wipe away any residue. Repeat the process if necessary until the table is clean.

5. Rinse and Dry: Finally, rinse the table with water and dry it thoroughly to prevent moisture damage.

For stubborn sealant, consider using a heat gun to soften it before scraping. Always test solvents on a small, hidden area first to ensure they won’t damage the table’s finish. With patience and the right tools, your outdoor table will look as good as new!