Removing construction adhesive from an outdoor table can be challenging, but with the right techniques, it’s entirely possible. Here’s a step-by-step guide to help you restore your table’s surface:

1. Scrape Off Excess Adhesive: Use a plastic scraper or putty knife to gently remove as much adhesive as possible without scratching the table.

2. Apply a Solvent: For water-based adhesives, warm soapy water may suffice. For stronger adhesives like polyurethane-based ones, try acetone or rubbing alcohol. Apply the solvent to a cloth and dab the adhesive, letting it sit for a few minutes before wiping.

3. Use a Commercial Adhesive Remover: Products like Goo Gone or WD-40 can break down stubborn adhesive. Follow the manufacturer’s instructions for best results.

4. Scrub Gently: Use a soft-bristle brush or sponge to scrub the area, working in circular motions. Avoid harsh abrasives that could damage the table’s finish.

5. Rinse and Dry: Once the adhesive is gone, rinse the area with water and dry it thoroughly to prevent water stains or residue.

For persistent stains, repeat the process or consider sanding the area lightly (if the table material allows). Always test solvents on a small, hidden area first to avoid discoloration. With patience, your outdoor table will look as good as new!