Removing roofing cement from an outdoor table can be challenging, but with the right techniques, it’s entirely possible. Here’s a step-by-step guide to help you tackle this stubborn stain:

1. Scrape Off Excess Cement: Use a plastic scraper or putty knife to gently remove as much dried cement as possible. Avoid metal tools to prevent scratching the table surface.

2. Apply a Solvent: For fresh cement, mineral spirits or acetone can soften the residue. Apply a small amount to a cloth and dab the stain, then wipe clean. Test on a hidden area first to ensure no damage occurs.

3. Use a Degreaser or Soapy Water: For older stains, mix warm water with dish soap or a degreaser. Scrub the area with a stiff brush, rinse thoroughly, and repeat if necessary.

4. Try a Baking Soda Paste: For tougher stains, make a paste of baking soda and water. Apply it to the stain, let it sit for 15 minutes, then scrub and rinse.

5. Pressure Wash (If Safe): If your table is sturdy, a low-pressure wash can help remove residual cement. Keep the nozzle at a safe distance to avoid damage.

Prevent future stains by covering your table during roofing projects. With patience and these methods, your outdoor table will look as good as new!